FAQs

1 ) . When does an Air Conditioner consume more power?
  • If the door or window is partially open
  • If the gaps in the window or door has increased
  • If the occupancy in the room has increased
  • If the window shades (inside/outside) have been removed
  • If a ventilator has been introduced
  • If the lighting load has increased
  • If any electronic appliance has been turned on
  • If the thermostat has been set on test run
2 ) . Why is the Air Conditioner not cooling?
  • If the air is blowing
  • If the vent lever is in open position
  • If the door or window is partially open
  • If the thermostat knob is put on 6
  • If the filter is unclean
3 ) . When does the Air Conditioner not start?
  • If the power supply is not on
  • If the ELCB has been used and switched on
  • If there is a current leak in other appliances
4 ) . What is Cool Mode?
  • Air Conditioner works at a set temperature
  • Room temperature is also displayed on the panel
  • The remote always displays the set temperature
  • The fan auto mode is applicable only in Cool Mode
5 ) . What is Dry Mode?
  • Air Conditioner works with a predetermined programme cycle of:
  • COMPRESSOR ON - 8 MIN. OFF - 4 MIN.
  • FAN - - - - - - - - - - - - - - - -OFF - 4 MIN.
  • COMPRESSOR ON - 6 MIN. OFF - 6 MIN.
  • FAN - - - - - - - - - - - - - - - -OFF - 6 MIN.
6 ) . What is Fan Mode?
  • Only the fan will be working
  • The speed selection is applicable
  • Auto selection is deleted
  • Air Conditioner will not give any cooling
7 ) . What is Sleep Mode?
  • Set temperature will increase by 2oC after completion of 2 hours from the time Sleep Mode was activated.
  • To deactivate depress Sleep Mode button
8 ) . What are the displays on the remote?
  • Set temperature